Signa on Android TV

This guide will walk you through the steps to install and set up the Signa application on your Android TV device.
The application has been tested on both Google TV and Amazon FireTV.

INSTRUCTIONS

1. DOWNLOAD ADBLINK
Visit the Adblink website to download the tool.

2. ENABLE DEVELOPER MODE ON YOUR ANDROID TV DEVICE

• Navigate to Settings on your device.
• Select About or Device Preferences.
• Locate the Build Number and press it 7 times until you see a confirmation message that Developer Mode has been enabled.

3. FIND THE IP ADDRESS AND CONNECT TO ADBLINK

• Go to Settings > Network & Internet to view your device's current IP address.
• Open Adblink on your computer and enter the IP address to establish a connection.

4. DOWNLOAD THE LATEST SIGNA APK
Get the latest version from Signa Latest APK.

5. INSTALL THE SIGNA APK
Use your preferred method (such as via ADB or a file manager) to install the downloaded signa-latest.apk on your Android TV device.

6. LAUNCH THE SIGNA APPLICATION

• Open your device's Apps section in Settings and launch the Signa application.
  (Note: The path may vary depending on your device.)

7. GRANT NECESSARY PERMISSIONS VIA ADBLINK CONSOLE
Open the console in Adblink and execute each of the following commands:

• Command 1:

  adb shell pm grant com.signa.firestick android.permission.SYSTEM_ALERT_WINDOW

• Command 2:

  adb shell pm grant com.signa.firestick android.permission.READ_LOGS

• Command 3:

  adb shell dumpsys deviceidle whitelist +com.signa.firestick

8. LAUNCH SIGNA AGAIN
Once permissions have been granted, reopen the Signa app.

9. REBOOT YOUR AMAZONTV DEVICE
Restart the device. The Signa app should automatically boot within a minute.

NOTE:
The steps above have been verified on both Google TV and Amazon FireTV devices. Depending on your device model or software version, some steps may vary slightly.